,

SF-6N25: Evaporative Air Cooler with 3D Cooling Pad

SKU: SF-6N25

$136.95

This Evaporative Air Cooler, Humidifier and Fan is versatile, lightweight and economical. The Cooler easily rolls from room to room for use anywhere in your house or office. This Air Cooler shoots a stream of air with oscillating louvers, to evenly distribute refreshing cool air. Features a 3-D Honeycomb Cooling Pad and remote control.


The Air Cooler works by endothermic reaction (a reaction that consumes heat), so this evaporative Air Cooler sucks air through a wick saturated with water. As the air flows through the wick, some of the water evaporates into the air, consuming the heat that was in the air. An air stream is then blown out the front of the unit and is considerably cooler than the current room temperature! This is not an air conditioner and therefore uses much less energy.

3-Dimensional Honeycomb Cooling Pad: An unique Cooling Pad for enhanced cooling performance. The Cooling Pad is made of cellulose paper, impregnated with unique ingredients for high performance and structural strength. Treated with special stiffening and wetting agents for maximum water absorption and retention; and with Anti-Rot chemical for prevention of algae and bacteria growth. Due to the 3-dimensional, weaving structure of the Cooling Pad, there is longer contact between air and water. Unlike other units on the market, where air only passes through a flat, 2-Dimensional cloth.

Note: This unit is NOT an air conditioner and does not have a compressor inside – air coolers will not lower a room’s ambient temperature. Air coolers are designed for spot cooling. This unit is best used in dry climates or open spaces. Leave window/door open to limit the rise of humidity and for better air ventilation in the room. Add as much ice as possible and set unit next to you for best effect.

Features and Functions

– With remote control
– 3D honeycomb cooling pad for enhanced cooling performance
– Water out indicator
– Energy saving – only 65W of power
– Washable nylon filter
– Automatic horizontal oscillation
– Manual vertical louvers
– 8L water tank capacity
– Three air speeds: H / M / L
– Three fan modes: Normal, Natural, Sleep
– Up to 7.5 hours off-timer
– ETL

 

INSTRUCTIONS MANUAL

Specifications
Input voltage
120V / 60Hz
Power consumption
65 W
CFM(high)
335
RPM(high)
1100
Horsepower
0.08
Evaporation capacity (high)
400 ml/hr
Noise level (high)
≤56dB
Unit dimension
16.77W x 13.9D x 30.31H in.
Shipping dimension
19 x 16 x 31 in.
Net weight
19 lbs
Shipping weight
24 lbs

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “SF-6N25: Evaporative Air Cooler with 3D Cooling Pad”

There are no reviews yet.